，大幅提升輸送效率。

　　The bin pump is mainly composed of pump top bin, pump body, feed valve, discharge device, intake pipeline, automatic control system, exhaust valve and other components. From a structural perspective, bin pumps can be divided into single bin pumps and double bin pumps. The single chamber pump adopts an intermittent conveying mode, while the double chamber pump is composed of two sets of independent pump bodies. By alternately operating the two sets of pump bodies, continuous conveying of materials can be achieved, greatly improving conveying efficiency.

　　為充分發揮倉泵的輸送效能

，在使用過程中需注意以下幾點：

　　To fully utilize the conveying efficiency of the bin pump, the following points should be noted during use:

　　1.進料環節需滿足持續供料條件

，要求在進料閥上部設置容積略大于泵體裝料容積的泵頂料倉，以保障連續進料。同時，可在泵頂料倉下部的錐體側面加裝振動器，或在內部增設物料氣化裝置，通過振動或氣化作用加速物料卸料，避免物料在倉內堆積堵塞。

　　1. The feeding process must meet the continuous feeding conditions, and it is required to set up a pump top material bin with a volume slightly larger than the pump body loading volume at the upper part of the feeding valve to ensure continuous feeding. At the same time, a vibrator can be installed on the side of the cone at the bottom of the pump top silo, or a material gasification device can be added inside to accelerate material unloading through vibration or gasification, avoiding material accumulation and blockage in the silo.

　　2.合理優化進料閥設計

，適當加大進料閥的口徑，以此增強物料的通過能力，縮短進料所需時間。例如，對于小規格的倉泵，可針對性地加上進料閥口徑，提升進料效率。

　　2. Reasonably optimize the design of the feed valve, appropriately increase the diameter of the feed valve, in order to enhance the material passing capacity and shorten the feeding time required. For example, for small-sized bin pumps, the diameter of the inlet valve can be specifically increased to improve the feeding efficiency.

　　3.應確保輸送階段在倉泵整個工作周期中占據較大比例

。通過采取促進泵體內部物料氣化、在輸送管道上增設助吹裝置等措施，能夠有效縮短物料輸送的時間，提高設備的整體運行效率。

　　3. It should be ensured that the conveying stage occupies a significant proportion of the entire working cycle of the bin pump. By taking measures such as promoting the gasification of materials inside the pump body and adding auxiliary blowing devices on the conveying pipeline, the material conveying time can be effectively shortened and the overall operating efficiency of the equipment can be improved.

　　4.維持供氣系統壓力的穩定至關重要。穩定的供氣壓力有助于加快物料輸送速度

，保障輸送過程的平穩進行，減少因壓力波動導致的輸送不暢等問題